考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

Solution of a Duffing-harmonic oscillator by the method of harmonic balance

The first-order harmonic balance method via first Fourier coefficient is used to construct an approximate frequency-amplitude relation for a Duffing-harmonic oscillator. This relation is in agreement with the result obtained by the Ritz procedure.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

磁场下含结构缺陷多组分超晶格中的局域电子态和电子输运

在有效质量近似理论下，利用转移矩阵和有效垒高方法研究了有限磁场下含结构缺陷的多组分超晶格中局域电子态的性质.在考虑各组分层有效质量的失配时，外加磁场会导致磁耦合效应的出现.磁耦合效应不仅引起局域电子能级的量子化，并且随着朗道指数或磁场强弱的变化，局域能级及其局域程度都会发生显著移动，特别是对高能区域的局域电子态影响更大.此外，还计算了电子输运系数，讨论了含结构缺陷的三组分超晶格中局域电子能级与输运谱透射禁区中的共振透射峰的关系，发现两者之间有着很好的对应关系，为相应的实验研究提供了依据. 关键词： 超晶格 局域电子态 磁场     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。     

电沉积n—CdSe在多硫溶液界面上的电荷转移机理

通过测定平带电位,澄清了OH~-离子在CdSe电极上的吸附情况,发现在S、S~(2-)、OH~-溶液中S~(2-)离子优先吸附,结合旋转环盘电极测量,证明n-CdSe电极在多硫溶液界面上的电荷转移过程。     

荧光波长对共焦显微镜成像特性的影响

导出了共焦显微镜中不同荧光波长情况下的荧光功率传输函数、三维脉冲响应函数（3D－PSF）和三维光学传递函数（3D－OTF）。结果表明，不同的荧光波长对共焦显微镜的空间截止频率、分辨率、光学传递函数存在明显的影响。当激发波长与荧光波长的比值下降到一定程度时，可以看到明显的失锥现象。